Movable emulsion pump                                             Fixed emulsion pump

Operation Principle

Pipeline high shear dispersing emulsifier is a high performance equipment used for continuous production or circulated treatment of fine material. In the small chamber, there are 1-3 sets of paired and clutched stators and rotor. Driven by motor, the rotor revolve quickly and produces a strong axial suction force which intakes the material to the chamber. The machine disperses, shears and emulsifies the material in shortest time, and the diameter range of the particles gets smaller so that fine and stable products are produced．

Process flow diagram

Structure diagram

1.Stator  2.Screw cap  3.Flexible gasket  4.Flat gasket  5.Rotor  6.Pump cavity  7. Mechanical seal (stationary ring)  8.Mechanical seal (moving ring)  9.Mechanical seal (stationary ring)  10.Seal cool seat   11.Pump seat  12.Pin  13.Pump shaft  14.Motor  15.Support  16.Frame

Note: the flow in the table refers to the data tested taking water as the medium．outlet pressure of the listed type≤0.2Mpa.

If circulated procedure is adopted, lntermittent high shear emulsifier is recommended.If there is high temperature, high pressure, flammable, explosive or corrosive condition, correct data should be provided by customers in order to customize the right producttype．

For mediums that flow slowly, pumps of matched flow rate should be equipped in the inlet．

The data in the table is subject to change without notice. See the actual products for theright data．